Contact with us (+7 495 987 34 54) or use email mail@cableprod.ru for help with the selection of materials and to clarify prices and availability in the warehouse.

Insulcap is used to seal the ends of all types of cable & protect from ingress of water/moisture. The caps are manufactured from high quality cross linked polyolefin material.

Selection Chart
CODE NO. Ds (Min.) Df (Max.) Ls (Min.) Tf(±10%) CABLE RANGE
GEC 001 S 6 2 25 2.0 2-4
GEC 001 SA 8 2 25 2.0 4-6
GEC 001 12 4 40 2.3 4-8
GEC 001 L 12 4 58 2.3 4-8
GEC 001 A 14 4 40 2.3 4-11
GEC 001 AL 14 4 58 2.3 4-11
GEC 101 20 7.5 55 2.3 8-16
GEC 101 L 20 8 75 2.5 8-16
GEC 101 A 25 8 55 2.3 8-20
GEC 101 AL 25 8 75 2.5 8-20
GEC 102 30 11 75 2.5 12-26
GEC 102 L 30 11 110 2.5 12-26
GEC 102 A 35 11 75 2.5 12-30
GEC 102 AL 35 11 115 2.5 12-30
GEC 201 40 15 90 3.3 16-35
GEC 201 L 40 15 120 3.3 16-35
GEC 201 A 45 15 90 3.3 16-40
GEC 201 AL 45 15 120 3.3 16-40
GEC 301 55 25 125 3.5 25-47
GEC 301 L 55 25 170 3.5 25-47
GEC 301 A 63 25 125 3.5 25-55
GEC 301 AL 63 25 170 3.5 25-55
GEC 401 75 35 140 4.0 35-68
GEC 401 L 75 35 180 4.0 35-68
GEC 401 A 85 36 140 4.0 36-78
GEC 401 AL 85 35 180 4.0 36-78
GEC 501 100 45 160 4.0 45-90
GEC 501 L 100 45 200 4.0 45-90
GEC 501 A 120 45 160 4.0 45-110
GEC 501 AL 120 45 200 4.0 45-110
GEC 601 130 60 160 4.6 64-120
GEC 601 L 130 65 300 4.6 64-120
GEC 701 158 60 165 4.6 70-145
GEC 701 L 160 65 300 4.5 70-145
GEC 801 S 190 125 220 4.0 140-165
GEC 801 A 230 125 220 4.0 140-200
GEC 901 310 120 220 7.0 140-280
GEC 1001 400 204 220 6.0 230-360
GEC 1101 500 204 220 6.0 230-460

*All dimensions are in mm D: Internal Diameter; s: as supplied; f: after recovery

Technical Specification
PROPERTIES VALUE STANDART
Physical
Tensile Strength 12 N/mm2(MPa) (min). ASTM D638
Ultimate Elongation 350% (min). ASTM D638
Density 1.05±0.2 gm/cm3 ASTM D792
Hardness 45±10 Shore D ASTM D2240
Water absorption 0.2 % (max.) ASTM D570
Thermal
Accelerated ageing (120°C for 500 hrs) ASTM D2671
Tensile Strength 11N/mm2(MPa) (min.) ASTM D638
Ultimate Elonhation 300% (min.) ASTM D638
Low Tempreture Flexibility (-40°C for 4 hrs.) No Cracking ASTM D2671
Heat Shock (250°C for 30 min.) No cracking of flowing ESI 09-11
Shrink Temperature 125°C IEC 216
Continuous Temperature Limit -40 to +100°C IEC 216
Electrical
Dielectic Strength 12kV/mm.(min.) ASTM D149
Volume Resistivity 1x1014 Ohm.cm (min) ASTM D257
Dielectric constant 5 (max.) ASTM D150